Scope setting long-range

Repeatability is the function that is absolutely essential to achieving a long series. Most of the areas there is a complaint reproducible. That said, it is necessary not only in its complaint. A careful analysis of the results for your chance to repeatability is a must. One area that does not meet the high requirements that you must use long-range to discard.

Scope repeatability issues to do with height adjustments and side adjustments.Therefore, you should check the settings if the results they produce are, to see repeatable.

Zero Repeatability

This test will ensure that the scope is used, is consistent if it matters, its zero "start".

First check if you have a weapon of precision with a cool barrel. This is essential if you do not throw on the scope of a rifle and just end up with ugly.

Assemble the frameManual for instructions. Pay particular attention to the fact that the gun is stable. To this end, and is a solid bench can be used. You do not need wind here because it could distort the results, so that only the tests conducted in a calm and quiet.

Zero height of the tower and a shot. Then, the height of the tower a couple of times a complete and reset. Shoot again. Both plans must fall in exactly the same hole, no differenceacceptable. Then turn at random from the survey, by pressing the button and choose to zero. Take another shot and see if it is reproducible. A good picture should have no problem.

Do the same test with the control tower side. Of course, because the shape is very important at large distances, so you must ensure that a robust and reliable height adjustment.

Playing in the final stage of testing, the turrets of vertical and lateral. ChangeRandom and zero adjustments on the two buttons and pull. All the balls must fall into the same hole. In this case, not what one looks more like a sieve, size is useless. If the results are correct and you see a clean hole to exist as repeatability tests more seriously.

Linear repeatability

Now we must ensure that the measures it really means to investigate and control side, they say. The tower seems to be reliable, provided that the zeroRepeatability but actually absurd when we see some results for specific adaptation that seek to create buttons shooting MOA.

First, you install a target of about 50 meters from the weapon. Zero height of the tower and shoot. Then, turn the knob to full-time and shoot again. Repeat the procedure until the setting of upper limit. The trick of this test is

a) if each interval of rotation is the same for MOAand

b) confirm the stability of the horizontal drift.

What you should see the end of the test is a vertical spacing with the dotted line an equal distance between the holes.

The repeatability test that is perfect for lateral adjustment, but this time you will eventually receive, as a straight horizontal line with several holes with views on both sides of the dead, finely aligned perfectly equidistant intervals control.

Repeat testseveral times to ensure that the selected picture is repeated. Then reduce to 1 / 2 laps instead of full. A framework should ideally work without problems.

Finally complicate the trial by both parties and greater accuracy at the same time. The result begins to look like a nice diagonal dead center.

Finally, the repeatability of the application is confirmed. Now that you are sure that the books are lying, weavailable to others, particularly refined and adjustments.