Re-in your gun

Call for any type of weapon receiver located in the barrel of the weapon, a thread in the process of re-chambering a rifle is to select a cartridge larger than those of you have already been used, the ability to remove the metal, expanding the room to fit the new cartridge. It is recommended not to assess why you have to change again raised the muzzle of your firearm. In the vast majority ofCase requires that the process of re-chambering instead of expulsion on the bolt. This article will teach you gun in five easy steps how to re-chamber. Here are the things that you need a truck gun, a pistol key, a space for the gauge head of a new cartridge, drilling new specifications to meet the Room, brake calipers (with an accuracy of 1 / 10 000 inch) drill lubricant / coolant and a new launcher capable of meeting the new cartridge.

The first step is necessarybe achieved, is the recipient of remove the barrel of a weapon by using the key before we talked. For this step, you need extreme torque and a gun truck, the receiver of the weapon and must be kept secure.

Step number two would be the center, the chamber of a gun, just stalled, giving your personal drill. The recommended tolerance for the completion of this process, in most cases, 1 / 10, 000 cm (orbetter).

Then you must be very careful when measuring the amount of depth that the new room and make sure to stop blocking drilling in the situation where the bit depth is greater than a new cartridge of the room. avoided in this difficult phase, the tolerance is about 1 / 10, 000 inches, or better.

Step number four is currently drilling the receiver while at the same time with a lubricant and coolant to keep thelowest possible temperature. If the metal temperature is too high, it means that the strength of the walls of the room, and most likely to produce a chamber, the cartridge can not contain the strong pressure of the gun is normal, and that is one.

Your last step would be to mount the gun receiver / room, using the meter of space in the room, to be sure that the head is secured at the appropriate distanceInstall the new cartridge. After running the right way to measure the distance of the head allows the screw. E 'away from the head that the bullet from your weapon is very unlikely to support life should be guaranteed, which means that the possibility of an excessive expansion of the cartridge Bass.

After completing all the steps above, it is now time to test your new room. We recommend you start with light loads andgradually work your way up to more powerful. The process of re-chambering any type of weapon is very difficult because it must be the person and night in a tight tolerances, we talked about it at first. For those of you who are not capable of this task is completed, you should put the gun to a gunsmith.